Double Glazing Seal Repairs
When double-glazed window seals fail, it can lead to damp and mould. This can cause damage to the frame and walls surrounding it, in addition to affecting your health.
Fortunately, resealing is a more cost-effective way to repair most uPVC window frames rather than replacing them. A glazier will clean the frame and the glass of the window. They will apply a fresh bead and smooth it.
Water Leaks
Window seals are designed to keep moisture to be kept out of your home. When they start to wear out, water can get into your windows. A leaking window is not only a nuisance but can also cause costly damage to the structure of your home. It is important to identify an issue early and have it fixed by an expert before it gets worse.
The source of leaking windows is usually not in the glass, but rather on the frame or sill. A leak in this region is the most common sign of a failed window seal. It can be caused by damage to the window seal as a result of weather or aging, worn out caulking or even an obstruction in the drainage area resulting in a build-up of ice or water.
Another indication of a damaged window seal is water appearing between the panes of double-glazed windows. It's not as risky as a leak of water as the water does not travel as far to get into your home. However, it does mean that the inert gases that are trapped between your panes have leaked out. This will reduce the insulation value of your window.
The last indication of a failing window seal is condensation between the panes. This could be due to an ineffective window seal or it could be due to the humid climate of your home or a problem with the glass. The condensation might not just be unpleasant, but it could cause the development of mildew and mould within your home, which is very difficult and expensive to remove.
It's time for you to examine your double-glazed windows if you observe these indications. A repair or replacement will aid in preventing your home from water leaks, cut down on energy costs, and even stop drafts. It's a small cost to pay for the security and comfort of your family. Contact Thompson Creek Window today to discuss your options regarding a window seal repair or replacement. Our professionals are always happy to help! We provide assistance to homeowners throughout the Mid-Atlantic.
Condensation
A broken seal for double glazing could allow water to enter the gap between the insulating elements. This can lead to fogging or misting within the window panes.
If you are noticing condensation inside your home It's time to call a double glazing repair service. Condensation could indicate that the vacuum seal made in the factory has failed and water has gotten into the insulated space.
Condensation can be caused by variety of factors, but most commonly by faulty sealants, gaskets or insulation in the uPVC frames of the windows. As a result, there are a few different double glazing repair options, but it is vital that the seal you choose to replace is correctly designed to ensure a perfect fit and a water-tight seal.
Typically gaskets used to fill in the gaps between double-glazed units are made from polyurethane foam. They are designed to last for a long time but they are susceptible to deterioration as time passes because of wear and tear, as well as exposure to various temperatures and weather conditions throughout the year.
As time passes the foam will shrink or crack over time. This can lead to cracks in your seal, allowing moisture to enter the double-glazed window. This not only creates condensation but it can cause the loss of energy efficiency, which means that you're losing heat from your home to outside air.
Re-sealing the windows is one solution to this issue. However, this isn't 100% guaranteed to fix the issue as it may only eliminate the condensation that has formed, but won't address the underlying problems that are causing the double-glazed windows to leak or develop condensation.
A professional who is able to provide an insurance-backed guarantee must replace your windows in full. If the company fails, you are still protected by insurance. It's important to note that your replacement windows must be warranted for at minimum 10 years.
Misting
Check that your double-glazing seals are in good condition as the fall season approaches. Window seals that are worn-out can impact the properties of your windows' insulation, but also cause condensation, dampness and mold. It is essential to address any issues in your double-glazed windows as soon as possible to avoid further damage and save money on energy costs.
Double-glazed windows consist of two glass panes that are joined by a gas-filled internal space. A layer of sealant on the outside fills in the gap between the uPVC frame and the glass. This is essential to maintain the air-tight seal which keeps cold and warm air from your home, thereby saving money on your heating bill. However, over time, these seals will be damaged due to aging or weather conditions, or even inadequate installation. When this happens, the magic insulation formula that makes your double glazed windows so effective could begin to lose its effectiveness.
If the seals are damaged or defective and are not repaired, they can lead to dampness and condensation, which could impact your health as well as the appearance of your window. Damp and mould not only cause damage to your floors, walls and ceilings, but also cause irritants and allergens within your home, which can be harmful to you and your family's health.
The most frequent issue with double glazing is the misting between the panes. This happens when moisture gets inside the insulated section of your windows. It isn't easy to fix without professional double-glazing repair.
There are DIY ways to tackle this issue, but we'd recommend against this because it's not only dangerous but also extremely messy and destructive to your windows. These methods involve drilling into your glass unit and then using chemicals to remove fog & condensation. This can cause many problems, most notably exposing your windows to water damage which could ruin the unit completely.
Professional glaziers have the tools as well as the skills and experience to properly reseal uPVC frames. They also can offer you long-lasting results. They can also provide tips on how to maintain your uPVC window to avoid any future issues.
Draughts
A draught from your window is an indication that the sealant has failed and must be repaired or replaced. This will stop cold air from getting into your home. It will also improve the efficiency of your energy, reduce heating costs, and improve the comfort of your home.
It is also important to note that not all draughts come from window seals but rather from the gap between the frame and the bricks. In some cases it is possible to fix this by simply filling the gap by caulking it with silicone. If this does not work, you'll require the seal to be professionally repaired.
When the sealant around a double-glazed window starts to break down it allows water ingress and can cause dampness or even mold in certain instances. This can affect your health and may be damaging to property. It is crucial to take care of any water leaks when you spot them. And if double glazing repairs near me are still under guarantee it is worth contacting the company you purchased windows from, since they could pay for the repairs.
It is a good idea to check whether the windows are covered by warranties. Certain companies offer lifetime warranties, while others only cover 10 years. If your double-glazed windows are under warranty, it's worth calling the company you bought the windows from as soon as you can and providing them with details of any issues that you're experiencing. It is recommended to contact the company in person, or via email and letter. This will ensure that everything is documented and clear.
It is important to note that draughts can often be caused by damaged hinges, rather than a lack of effective seals. The hinges close the window sash which is the one that you open. If they're not regularly oiling them they could become stiff. This could leave a gap between the sash and the frame and allow cold air to enter. This issue can be resolved by replacing the hinges without impacting window seals.
